Shaking table is used for gravity separation of fine grained material equipment, widely used in the sorting tin, tungsten, gold and silver, lead, zinc, tantalum, niobium, iron, manganese, titanium iron and coal, etc. Table made by our factory has a long history, and constantly develop innovation, from the initial straight wave surface based on the development to the single bed wave surface of bed table (1970 s); To the table surface (1990 s), make the table processing, recovery and enrichment ratio has improved significantly. Table of ore dressing process was conducted on the complex of the tilting table, ore particle swarm from Angle of feeder trough into bed face, at the same time by lateral flushing water supply for water tank, so the ore grain in gravity, transverse flow momentum, asymmetry of bed surface for reciprocating motion under the action of the inertia and friction, according to the proportion and granularity theory, then make the longitudinal motion along the bed surface and lateral movement along the inclined bed surface. As A result, the proportion and granularity of different particles gradually along the movement direction of the respective fan flow from A to B while, respectively from the concentrate and tailings discharge side of the different area, the last is divided into concentrate, middlings and tailings. Shaking table is one of the important equipment processing. It is widely used in tungsten. Tin, molybdenum, lead, zinc, niobium and other rare metals and precious metals can also be used to choose the iron ore. Manganese ore and coal.
Shaking table is mainly composed of the head of a bed, motor, slope, bed surface, trough, sink, reflex and lubricating system of eight parts. The bed surface vertical reciprocating motion by the crank rod drive mechanism. Larger pulley drive motor through a belt drive the crankshaft rotating rocker subsequently for upper and lower movement, rocker downward movement, bracket for rear axle and reciprocating lever backward, the spring is compressed bed surface is through linkage and reciprocating rod connected, so at this time also made bed face backward movement, when the rocker upward movement, due to the tension of the spring to promote, bed surface then move forward.
1. Stiffness, Strength.
2. Bibulous rate is low, it does not increase weight
3. Working surface wearability.
4. The chemical resistance, resistance to acid and alkali. Don’t avoid pulp of medicament.
5. Good weatherability. Shape stability.
6. The classification performance is good. Stable.
7. Keep the wooden bed surface assembly size, both can swap the installation.